2016 Discovery 4

FITTING TETHER ANCHORAGE CHILD RESTRAINTS

WARNING

Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps.

WARNING

When fitting a child seat or restraint system, always pass the tether strap over the top of the seatback and beneath the head restraint.

WARNING

If a child seat or restraint system is to be fitted to the center seating position, the center armrest must be in the stowed position (folded into the seat). It is impossible to secure the child seat or restraint system correctly with the armrest in place, which reduces the effectiveness of the restraint in the event of an accident.

Your vehicle is equipped with tether strap anchorage points behind the second row seat frames or the loadspace floor. These should be used to attach straps from child seats or restraint systems.

The second row seat tether strap anchorage point locations (see illustration).

The third row seat tether strap anchorage point locations (see illustration).

Installing the child restraint:

  1. Install the child restraint securely in one of the rear seating positions.

  2. Pass the tether strap over the seatback and beneath the head restraint.

  3. Attach the tether strap hook to the tether anchor point. Make sure that the tether strap hook is facing the correct way (see illustration).

  4. Tighten the tether strap according to the child restraint manufacturer's instructions.

NOTES

A tether anchorage is provided for the second row center seat position. Do not use this anchor position with a LATCH anchorage child seat.