2016 Discovery 4

CONNECTING A STARTING AID

To start the vehicle using a starting aid or a booster battery, carry out the following:

  1. Connect the positive (red) jump lead to the positive (+) battery terminal of the discharged battery.

  2. Connect the negative (black) jump lead to the vehicle's ground point.

  3. Switch on the starting aid.

  4. Start the engine and allow it to idle.

  5. Disconnect the negative (black) jump lead from the vehicle's ground point.

  6. Switch off the starting aid.

  7. Disconnect the positive (red) jump lead from the battery terminal of the vehicle.