2016 Discovery 4

PAIRING AND CONNECTING USING THE PHONE

NOTES

The process of pairing and connecting your phone with the vehicle using the mobile phone will vary depending on the type of phone used.

  1. Switch the ignition on and make sure the Touch screen is active.

  2. From the Phone menu, select Change phone.

  3. From the Phone device list menu, select Search new.

  4. Select the Device to vehicle option.

    NOTES

    The vehicle’s Bluetooth® wireless technology system is discoverable for only three minutes.

  5. Using your phone, search for Bluetooth wireless technology devices.

    On some phones, this is referred to as a new paired device. See the phone's operating instructions for further information.

  6. When the vehicle's Bluetooth wireless technology system is discovered, follow the on-screen instructions. Select Yes, when prompted, to confirm the pairing.

    Either the phone or the vehicle's system will ask for a PIN (Personal Identification Number). When prompted, enter a PIN of your choice and select OK to confirm.

  7. Enter the same PIN into the other device.

  8. Once the phone is paired and connected to the system, a confirmation message will be displayed before switching to the Digit dial screen.

    NOTES

    Some phones require the Bluetoothwireless technology device pairing to be set as ‘authorized’ or ‘trusted’ in order to automatically connect. Refer to the phone’s operating instructions for further information.