2016 Discovery 4

RADIO CONTROLS

WARNING

Do not adjust the Touch screen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents, causing injury or death.

WARNING

Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing.

NOTES

Some electronic equipment being used within the vehicle, or within close proximity to the vehicle, may affect the performance of this system (e.g., charging a device, etc.).

Press the Media menu button, or touch the Media menu soft key from the Touch screen Home menu and then select the Radio soft key. See TOUCH SCREEN HOME MENU.

  1. AM/FM: Waveband selection. Touch to view and select a waveband. The radio will tune to the last used station on that waveband. Touch again to close.

  2. Displays information about the current station.

  3. Seek down:

    Short touch to auto-seek down the frequency to the next radio station.

    Long touch to activate manual seek mode. Further short touches change the frequency in single decrements. A further long touch will scan backwards through the current waveband until the soft key is released.

    NOTES

    When manual seek is selected, auto-seek cannot be selected for approximately 10 seconds.

  4. Information: Touch to display more information from the broadcasting station.

  5. Seek up:

    Short touch to auto-seek up the frequency to the next radio station.

    Long touch to activate manual seek mode. Further short touches change the frequency in single increments. A further long touch will scan forwards through the current waveband until the soft key is released.

  6. Settings: Touch to view and activate/deactivate the following features: RBDS and HD Radio. See RADIO BROADCAST DATA SYSTEM (RBDS).

  7. Station list (FM only): Select to view a list of available stations on the waveband. The list can be sorted by Frequency, Name, or Category (pop, news, sport, etc.) by selecting the appropriate soft key. Touch to select the chosen station.

    If the stations are sorted by category, touch the chosen category to view and select a corresponding station.

  8. Frequency input: Select to enter a known frequency of a station on the current waveband, using the numeric keypad that appears. Select OK, or wait for 2 seconds to tune to the entered frequency.

  9. Presets: Each waveband has 6 preset positions.

    Touch and release to tune to the station stored on that preset.

    Touch and hold to store the current station on that preset (the radio will mute while the station is stored, and then beep).

    Use the seek buttons on the steering wheel to change to the next or previous preset station.