2016 Discovery 4

LIMP-HOME MODE

If a transmission system fault is detected, a warning message displays in the message center. In this event, only limited gears may become available. If possible, the vehicle should be carefully driven to the nearest place of safety. In this event, seek qualified assistance.

NOTES

The driver should be aware that the vehicle’s performance is also reduced and must take this into account when driving. The use of the steering wheel's gearshift paddles are also disabled.

Some transmission faults may cause the gear selector to be locked in position, until the ignition is switched off. A flashing gear status in the message center, indicates that the driver's gear request cannot be engaged. In this event, select Neutral (N) and then select the required gear change again.

If the gearbox is still unable to engage the requested gear, contact a retailer/authorized repairer.