2016 Discovery 4

LIGHTING CONTROL

  1. Headlamps/side lamps off.

  2. Side lamps on.

  3. Low beam headlamps on.

  4. Autolamps on: With the switch in this position and the ignition on, the side lamps, low beam headlamps, and license plate lamps illuminate automatically when the ambient light level is low. Auto high beam and Headlamp courtesy delay may also be activated (see below).

  5. Dimmer control.

  6. Front fog lamps on/off: When the front fog lamps are on, the front fog lamp warning lamp will illuminate.

  7. Rear fog lamps on/off: When the rear fog lamps are on, the rear fog lamp warning lamp will illuminate.

  8. High beam on/off/flash: When low beam headlamps are switched on, push the lighting control to change to high beam (the high beam warning lamp will illuminate).

    To flash the headlamps at anytime, briefly pull the lighting control and release it.

    NOTES

    Do not use high beam where it may distract other road users.