2019 Range Rover

АДАПТИВНЫЙ ОГРАНИЧИТЕЛЬ СКОРОСТИ

WARNING

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See БЕЗОПАСНОСТЬ ОГРАНИЧИТЕЛЯ СКОРОСТИ.

NOTES

The adaptive speed limiter does not operate if the traffic sign recognition system is not operating. See РАСПОЗНАВАНИЕ ДОРОЖНЫХ ЗНАКОВ.

  1. SET+.

  2. -.

  3. RESUME.

  4. CANCEL.

  5. LIM.

Press the LIM button on the steering wheel to switch the adaptive speed limiter on. Depending on vehicle status, the instrument panel displays either the speed limiter or the adaptive speed limiter information lamp.

If the speed limiter information lamp displays, press and hold the CANCEL button. The adaptive speed limiter information lamp replaces the speed limiter information lamp to confirm that the adaptive speed limiter has been selected.

The adaptive speed limiter does not operate until activated. Press the SET+ button or the RESUME button to activate the adaptive speed limiter. The instrument panel and Head-Up Display (HUD) show the detected speed limits as icons.

NOTES

In some markets the Speed Limiter function is not applicable and therefore the LIM button will have no functionality.

If the adaptive speed limiter detects a speed limit lower than the current vehicle speed, it automatically slows the vehicle to meet the speed limit. Press the RESUME button to increase the rate of deceleration.

If the system detects a speed limit higher than the current vehicle speed, it allows the driver to accelerate up to the speed limit. Press the RESUME button to increase the rate of acceleration.

Press the CANCEL button to suspend adaptive speed limiter operation. Press the RESUME button or the SET+ button to resume adaptive speed limiter operation.

The adaptive speed limiter's detected speed limit can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the adaptive speed limiter's detected speed limit. When the vehicle's speed drops below the adaptive speed limiter's detected speed limit, any speed limitations are reapplied.

The system's detected speed limit can be adjusted, if required, to control the vehicle’s speed at just above or below the detected speed limit. To adjust the detected speed limit:

  1. Press the SET+ button to raise the maximum vehicle speed 2 km/h (1 mph) above the detected speed limit. The maximum increase available is 10 km/h (6 mph) above the detected speed limit. Press and hold the SET+ button to raise the maximum vehicle speed directly to 10 km/h (6 mph) above the detected speed limit.

  2. Press the - button to lower the maximum vehicle speed 2 km/h (1 mph) below the detected speed limit. The maximum decrease available is 10 km/h (6 mph) below the detected speed limit. Press and hold the - button to lower the maximum vehicle speed directly to 10 km/h (6 mph) below the detected speed limit.

NOTES

Any adjustments to the system's detected speed limit are lost if the speed limiter is activated, or if the vehicle’s electrical systems are switched off.