2019 Range Rover

УСТАНОВКА ДЕТСКИХ КРЕСЕЛ С КРЕПЛЕНИЯМИ ISOFIX

All vehicles:
WARNING

Do not attempt to fit ISOFIX restraints to the centre rear seating position. The anchor bars are not designed to hold an ISOFIX restraint in this position. The child could be endangered in a crash if the child restraint is not properly secured in the vehicle.

WARNING

If the child restraint is not correctly anchored, there is a significant risk of injury to the child in the event of a collision or emergency braking manoeuvre.

WARNING

WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle.

ISOFIX anchorages are provided at the outer seat positions on the second row seats.

A label displaying the ISOFIX symbol is sewn into the seats to indicate the position of the ISOFIX lower anchorages.

To fit an ISOFIX child seat without a top tether strap:

  1. Raise or remove the head restraint.

  2. The ISOFIX anchor points are located in the fold of the seats.

  3. Slide the child seat locking mechanism into the anchor point.

Test the security of the child restraint. To do this, attempt to pull the restraint away from the vehicle's seat and twist the restraint from side to side. Even if the restraint appears secure, the anchor points should be checked visually, to make sure they are correctly attached.

Vehicles with rear bench seats:

To fit an ISOFIX child seat with a top tether strap:

  1. Move the front seat fully forward.

  2. Place the child restraint as far forward as possible on the seat cushion of the rear seat.

  3. Release the rear seatback. See СКЛАДЫВАНИЕ И РАСКЛАДЫВАНИЕ ЗАДНИХ СИДЕНИЙ.

  4. With the rear seatback remaining partially folded, attach the top tether strap. Do not add tension to the top tether strap at this point. See УСТАНОВКА ДЕТСКИХ КРЕСЕЛ СО СТРАХОВОЧНЫМИ ЛЯМКАМИ.

  5. Return the rear seatback to the fully raised position.

    WARNING

    Make sure the locking mechanism is fully engaged when the rear seatback is raised. An unsecured seatback may not properly support an occupant during a collision or sudden stop.

  6. Slide the child seat locking mechanism into the anchor points.

  7. Return the front seat to its original position.

  8. Tension the top tether strap according to the child restraint manufacturer's instructions.

NOTES

Always make sure that if a top tether strap is provided, it is fitted and tightened correctly.

To test the security of the child restraint, attempt to pull the restraint away from the vehicle's seat and twist the restraint from side to side. Even if the restraint appears secure, the anchors should be checked visually to make sure they are correctly attached.

Vehicles with executive class rear seats:
NOTES

ISOFIX anchorage points are covered by sewn flaps in executive seats. Uncover the anchorages to access and fit child restraints.

To fit an ISOFIX child seat with a top tether strap:

  1. Fit the child restraint securely in one of the rear seating positions.

  2. Pass the tether strap over the seatback and beneath the head restraint for the outer seat positions.

    NOTES

    For the centre seat position, make sure that the centre head restraint is at its lowest position. Then pass the tether strap over the fixed head restraint.

  3. Attach the tether strap hook to the tether anchor point on the back of the seat. Make sure that the tether strap hook is facing toward the back of the seat.

  4. Tighten the tether strap, according to the child restraint manufacturer's instructions.

NOTES

Always make sure that if a top tether strap is provided, it is fitted and tightened correctly.

To test the security of the child restraint, attempt to pull the restraint away from the vehicle's seat and twist the restraint from side to side. Even if the restraint appears secure, the anchors should be checked visually to make sure they are correctly attached.

NOTES

For child restraints fitted with a support leg, adjust the leg so that it rests firmly on the floor.