2019 Range Rover

ПОДКЛЮЧЕНИЕ ПОРТАТИВНОГО УСТРОЙСТВА

CAUTION

Read the manufacturer's instructions for any device before it is connected to the media system. Make sure that the device is suitable. Comply with any instructions regarding connection and operation. Failure to do so may result in damage to the vehicle’s media system or the media device.

Connect the device into the appropriate socket:

  1. Front HDMI/MHL socket.

  2. Front USB sockets.

  3. Rear media HDMI socket.

  4. Rear media USB sockets.

  5. Rear media HDMI/MHL socket.

Front sockets are located in the centre console’s cubby box. Rear media sockets are located at the rear of the centre console.

NOTES

Use the cable supplied with the media device to connect to the USB socket.

NOTES

High quality cables are recommended to be used with Apple devices, as this enhances operation.

NOTES

A USB socket cannot be used to connect more than one USB device to the media system.

NOTES

Devices connected to the USB sockets are charged. Devices that are fully discharged do not play. Higher-rated devices that require more than 7.5W to charge may not display an indicator when charging. These devices are charged without the indicator being displayed.

NOTES

HDMI devices are not charged.

NOTES

Apple devices should be updated to the latest iOS version, otherwise, full support cannot be guaranteed.

NOTES

Voice command is only available for newer Apple devices, i.e., devices that are connected to the system via a lightning connector.

NOTES

Voice command will not operate devices connected to the system via Bluetooth®.

NOTES

Options, such as Repeat and Shuffle, relate to the device currently playing. The options do not apply to any subsequent device. Previous Repeat and Shuffle selections deactivate when a new queue has been created.

NOTES

The available sockets vary, according to vehicle specification.

The SuperSpeed USB Trident Logo is a registered trademark of USB Implementer Forum, Inc.

SV Autobiography only:

Rear portable media sockets are located in the storage compartment, as illustrated. Press the button (1) to access the sockets.