2019 Range Rover


If a transmission system fault is detected, the instrument panel displays a warning message. In this event, only limited gears are available. If possible, the vehicle should be carefully driven to the nearest place of safety. In this event, seek qualified assistance.


The driver should be aware that the vehicle’s performance is also reduced and must take this into account when driving. Use of the steering wheel paddle shifts is also disabled.

Some transmission faults may cause the gear selector to be locked in position until the ignition is switched off. A flashing gear status in the instrument panel indicates that the driver's gear request cannot be engaged. In this event, select Neutral (N) and then select the required gear change again.

If the transmission is still unable to engage the requested gear, contact a retailer/authorised repairer.