2019 Range Rover

ПЕРЕПРОГРАММИРОВАНИЕ ОТДЕЛЬНОЙ КНОПКИ РАДИОПУЛЬТА ДЛЯ УПРАВЛЕНИЯ ГАРАЖНЫМИ ВОРОТАМИ

To program a remote device to a previously programmed HomeLink button:

  1. Switch the ignition on.

  2. Press and hold the required HomeLink button. After approximately 20 seconds, the LED indicator starts to flash orange. See ПРОГРАММИРОВАНИЕ.

  3. Release the button.

  4. Follow the programming instructions from step 3 onwards, as described in PROGRAMMING.

HomeLink is a registered trademark of Gentex Corporation.