2019 Range Rover

ЗАМЕНА ПРЕДОХРАНИТЕЛЯ

WARNING

Hybrid vehicles only: The high voltage system has no serviceable parts. Never disassemble, remove or replace high voltage components, cables or connectors. Tampering with the high voltage system can cause severe burns or electric shock, which may result in serious injury or death. High voltage cables and connectors are coloured orange for identification purposes. If maintenance or repair is required, always consult a retailer/authorised repairer.

CAUTION

Always switch off the ignition system and the affected electrical circuit before replacing a fuse. Failure to do so could cause damage to the vehicle.

CAUTION

Fit approved replacement fuses of the same rating and type, or fuses of a matching specification. Using an incorrect fuse may result in damage to the vehicle's electrical system and can result in a fire.

CAUTION

If the replacement fuse blows after fitment, the system should be checked by a retailer/authorised repairer. Further damage could be caused to the vehicle if ignored.

NOTES

Relays and fuses not detailed in this Owner's Handbook should only be replaced by qualified persons.

If an electrical system has stopped operating, the cause may be a blown fuse. The easiest way to check if a fuse has blown is to first remove it.

To check for a blown fuse:

  1. Check the fuse box tables in the Fuses section of the Owner's Handbook to identify the correct fuse.

  2. Gain access to the appropriate fuse box. See РАСПОЛОЖЕНИЕ БЛОКОВ ПРЕДОХРАНИТЕЛЕЙ.

  3. Check the fuse box label to locate the correct fuse. Depending on the fuse box, the label is located on the underside of the lid.

  4. Remove the fuse by pulling it straight out using the removal tool. See РАСПОЛОЖЕНИЕ БЛОКОВ ПРЕДОХРАНИТЕЛЕЙ.

  5. Check for a break in the wire within the fuse. If the wire within the fuse is broken, the fuse has blown and needs replacing. If the wire is still intact, consult a retailer/authorised repairer.

  6. Refit or replace the fuse, as appropriate. Make sure the fuse is pushed fully into its correct position.