2017 Range Rover

SURROUND CAMERA SYSTEM

WARNING

Responsibility remains the driver's to detect obstacles and estimate the vehicle's distance from them when maneuvering the vehicle.

CAUTION

Some overhanging objects or barriers, which could cause damage to the vehicle, may not be detected by the camera.

CAUTION

The camera must be kept clean and free from debris or obstructions, e.g., ice, frost, snow, leaves, mud, or insects. Failure to keep the camera clean may result in miscalculation or false indications. See SENSORS AND CAMERAS.

CAUTION

Do not attach stickers or objects to the rear bumper that may interfere with the camera.

The surround camera system cameras are located as follows:

  • In the center of the front lower grille.

  • Above the rear license plate or in the center of the rear bumper.

  • Underneath each of the door mirrors.

NOTES

The quality of the camera views may vary in different lighting conditions.

  1. Front camera: Touch to enable the front camera view and forward vehicle guidance.

  2. Camera selection arrows: The arrows around the vehicle highlight when selected.

  3. Plan view: Touch to display a 360° plan view of the vehicle and its immediate surroundings, using all of the cameras. Forward vehicle guidance is also activated.

  4. Cameras icon: Touch to select the cameras feature.

  5. Right side or rear camera view split-screen image: When presented as a split image, touching either image switches to a full screen view of that image.

  6. Left side or front camera view split-screen image: When presented as a split image, touching either image switches to a full screen view of that image.

  7. Settings icon: Touch to select the Camera Settings menu.

    Hitch Assist: (available only when a tow ball is fitted): Select ON or OFF.

    Parking Guidance: Select ON or OFF.

    Parking Aid Graphics: Select ON or OFF.

    360° PDC Plan View: Select ON or OFF.

    NOTES

    Depending on the vehicle specification, the Camera Settings menu may include further camera settings. When the list includes six or more feature settings, a scroll bar displays.

  8. Parking aids icon: Touch to switch the parking aid graphics on or off.

  9. Camera selection icon: Touch to select a different camera view.

    NOTES

    A maximum of two views display at any one time (instead of the 360° view). To change a camera view if two views are already selected, first deselect one of the views and then make another selection.

  10. Surround camera icon: Touch for a 360° view, using all of the cameras.

  11. Volume icon: Touch to mute the volume of the parking aid warning tones.

  12. Tow assist icon: Touch for trailer setup.

Camera shortcuts:

The function of the Camera icon (4) varies. Depending on the selected gear and the vehicle’s road speed, the icon gives the following options:

  • When in a forward gear, at vehicle speeds below 6 mph (10 km/h):

    Touch once to select the Front Intersection view.

    Touch twice to select the Rear Intersection view.

    Touch a third time to return to the Front Intersection view.

  • When in Neutral (N) or Park (P):

    Touch once to select the Plan View.

    Touch twice to select the Front Intersection view.

    Touch a third time to select the Rear Intersection view.

  • When in Reverse (R) gear:

    Touch once to select the Rear Intersection view.

    Touch twice to select the Front Intersection view.

    Touch a third time to return to the Rear Intersection view.

Pan and Zoom tools:

When in a full screen view of a camera image, touch the image to display the pan and zoom tools. The tools allow the image to be viewed at three levels of detail and can be manipulated left, right, up, and down. Double tap the image to jump to the middle level of zoomed detail and allow the same pan and zoom functionality.