2017 Range Rover

FITTING TETHER ANCHORAGE CHILD RESTRAINTS

WARNING

Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps. The child could be endangered in a crash if the child restraint is not properly secured in the vehicle.

WARNING

When fitting a child seat or restraint system, always pass the tether strap over the top of the seatback and beneath the head restraint. In the event of an accident, an unsecured object could cause serious injury.

WARNING

If removing a head restraint in order to fit a child restraint, always secure the head restraint when storing it. In the event of an accident, an unsecured object could cause serious injury.

WARNING

Before fitting a child seat or restraint system to the center rear seating position, the center armrest must be folded (stored) into the seatback. In the event of an accident, an unsecured object could cause serious injury.

The vehicle is equipped with anchorage points on the back of the second row seat frames. The anchorage points should be used to attach straps from child seats or restraint systems.

To attach a child restraint to an anchorage point:

  1. Fit the child restraint securely in one of the rear seating positions.

  2. Pass the tether strap over the seat back and beneath the head restraint for the outer seat positions.

    NOTES

    For the center seat position, pass the tether strap over the fixed head restraint.

  3. Attach the tether strap hook to the tether anchor point. Make sure that the tether strap hook is facing toward the back of the seat.

  4. Tighten the tether strap according to the child restraint manufacturer's instructions.

NOTES

A tether anchorage is provided for the center seat position. Do not use this anchor position with a LATCH anchorage child seat.