2017 Range Rover

LOADSPACE COVER

WARNING

Medical devices: The undersides of the forward and mid loadspace cover sections each contain a magnet. The magnets are located in depressions along the center line of vehicle. The magnetic field may interfere with pacemakers, defibrillators, or other medical devices.

When in the vehicle, or when handling the loadspace cover, maintain at least 6 inches (15 cm) of separation between your pacemaker or defibrillator and the loadspace cover.

WARNING

Never place objects on top of the loadspace cover. During an accident or sudden maneuver, loose objects can cause serious injury or death.

WARNING

Do not store the loadspace cover loose in the vehicle. During an accident or sudden maneuver, the loadspace cover could cause serious injury or death.

To fold the loadspace cover

  1. Push firmly down and forwards. Then push upward on the underside of the loadspace cover handle.

  2. Fold the loadspace cover forwards.

To remove the loadspace cover:

  1. Pull the whole assembly rearwards to disconnect the locating pins. Remove and store safely.

    NOTES

    To remove or refit the loadspace cover, it is first necessary to make sure the rear seats are in the fully upright position.

  2. To refit the loadspace cover, place the assembly in position. Engage the locating pins into the sockets and press firmly to lock the assembly in position. If required, pull the outer edge towards the rear, to cover the loadspace area.

To access the loadspace from inside the vehicle: Push firmly down on the furthest edge of the cover while pulling it towards the rear seats. The cover folds, allowing access to the loadspace area.

NOTES

To access objects in the loadspace from within the vehicle, it may first be necessary to remove the rear head restraints.