2017 Range Rover Evoque

CLIMATE CONTROL

  1. Temperature controls: Rotate to adjust the temperature.

    NOTES

    The system cannot achieve a temperature differential from left to right of more than 7°F (4°C).

  2. MAX: Maximum defrost program.

    Press to switch maximum defrost for the windshield on or off.

    NOTES

    In low temperatures, it is advisable to close the center face-level vent and direct air flow from the outer face-level vents towards the side windows. Directing air flow towards the side windows helps to keep the side windows clear of ice.

  3. Air distribution: An LED illuminates in the selected switches.

    NOTES

    More than one setting may be selected at a time to achieve the desired distribution.

  4. AUTO control: Press to switch automatic operation on. Dependent on the vehicle’s specification, the various options for AUTO mode can be set via the CLIMATE SETTINGS menu.

    NOTES

    AUTO mode is the recommended normal operating mode. The Air Conditioning (A/C) and heating and ventilation controls automatically provide an optimum environment at the selected temperature.

  5. Heated front windshield: Press to switch on or off. If left on, it deactivates after a timed period, dependent on the outside temperature.

    In cold ambient conditions, the heated front windshield and rear screen switch on automatically when the engine is started. This function can be switched on or off via the Climate Settings screen. See CLIMATE SETTINGS.

  6. Heated rear screen: Press to switch on or off. If left on, it deactivates after a timed period, dependent on the outside temperature.

    CAUTION

    Do not attach labels to the rear screen. Do not scrape or use abrasive materials to clean the inside of the screen.

  7. Heated seats. See HEATED SEATS.

  8. Climate seats. See CLIMATE SEATS.

  9. Recirculation (vehicles fitted with an air quality sensor):

    Automatic recirculation is switched on by default. The AUTO LED indicator illuminates. The system automatically selects fresh and recirculated air, dependent on pollution and cabin humidity information received from the air quality sensor.

    Press the AUTO/MAN button for a single timed recirculation. The MAN LED indicator illuminates.

    Press and hold the AUTO/MAN button until the MAN LED indicator flashes, to activate the latched (continuous) recirculation. The MAN LED indicator illuminates constantly.

    To return to automatic recirculation, briefly press the button again.

  10. Recirculation (vehicles not fitted an air quality sensor):

    Press repeatedly to cycle through the options.

    Press briefly to activate the timed recirculation. The button LED indicator illuminates when recirculation is on.

    Press and hold the button to activate latched (continuous) recirculation. The button LED indicator flashes and then illuminates constantly.

    To cancel recirculation, press the button briefly.

    NOTES

    Prolonged use at low temperatures may cause the windows to fog.

  11. A/C: Press to switch the Air Conditioning (A/C) system on or off. The A/C system can be switched on or off independently of the other climate control functions.

  12. Blower speed control: Rotate to adjust the blower speed.

    In manual mode, current speed selection is indicated by illuminated LEDs.

NOTES

Some of the buttons have an LED indicator lamp that illuminates to confirm selection.

NOTES

Some functions are not available on all vehicles.

NOTES

If the climate control system is switched off, pressing an AUTO button or the defrost button switches the climate control system on.

NOTES

Water expelled by the A/C system may collect underneath the vehicle when parked. This is not a cause for concern.