2017 Range Rover Evoque

LOADSPACE COVER

WARNING

Never place objects on top of the loadspace cover. During an accident or sudden maneuver, loose objects can cause serious injury or death.

To remove the loadspace cover:

  1. Release the two straps from the pins on the tailgate.

  2. Lift the cover slightly, then pull the cover rearwards to release the cover's spring-loaded clips from the securing pins on the loadspace side trim.

Storing the cover:
WARNING

Do not store the loadspace cover loose in the vehicle. During an accident or sudden maneuver, the loadspace cover could cause serious injury or death.

  1. Remove the loadspace cover.

  2. Fold the rear seats forward.

  3. Position the cover vertically, approximately where the upright rear seatbacks are normally. The top surface of the cover must be facing forward, with the spring-loaded clips at the top.

  4. Locate the cover's spring-loaded clips onto the securing pins and click into place.

  5. Return the rear seats to the upright, locked position.

Refitting the cover:

Locate the cover's spring-loaded clips onto the securing pins. Push the cover rearward to fully engage the clips onto the pins.

To refit the straps:

  1. Fit the straps over the pins on the tailgate.

  2. Pull down lightly on the straps until they click into place.