2017 Range Rover Evoque

FRONT HEAD RESTRAINTS

WARNING

Head restraints are designed to support the head, not the back of the neck. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision.

WARNING

Adjust the head restraint so that the top of the head restraint is above the centerline of the head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the event of a collision.

WARNING

It is possible to swivel the head restraint forwards or backwards. For greater protection in the event of a collision, the head restraint should be adjusted so that it is as close to the back of the head as is practical.

WARNING

Do not drive, or carry passengers with the head restraints removed from an occupied seat. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision.

WARNING

Never adjust the head restraints while the vehicle is in motion.

WARNING

Always store a removed head restraint securely. In the event of an accident, an unsecured object could cause serious injury or death.

To adjust the front head restraint:

  1. Move the head restraint up to the required position.

  2. To move the restraint downwards, press the button on the side of the head restraint and move the restraint to the required position.

Two people are required when removing a front head restraint.

To remove the head restraint:

  1. Move the head restraint to the upper most position.

  2. Using two hands, press down on each of the collars on the top of the seat to engage hidden buttons inside the seat.

  3. While the collars are being pressed down, the second person should lift out the head restraint.

Make sure the head restraint is refitted before the seat is used by a passenger.

To refit the head restraint:

  1. Press the button on the side of the head restraint and push the stems into the restraint as far as they will go.

  2. Line the stems up with the hole in the collars and push down until both stems engage into the locked position.