2017 Range Rover Evoque



Always find a safe place to stop, off the highway and away from traffic.

Apply the Electric Parking Brake (EPB) and engage Park (P).

Make sure all passengers and animals are out of the vehicle and in a safe place, away from the highway.

Place a warning triangle at a suitable distance behind the vehicle, facing towards oncoming traffic.

Disconnect any attached trailer from the vehicle.

If the vehicle has been driven recently, do not touch exhaust system components until they have cooled.

Access to a rear fog light housing is from beneath and behind the quater panel. The bulb holder is a black plastic unit that incorporates the bulb. No tools are required but a flashlight may be of use.

  1. To remove the bulb holder, press in the outer securing clips on the black plastic unit and pull the holder free of the housing.

  2. To separate the bulb holder from the electrical connector, first push up the connector lock.

  3. Push in the release mechanism while pulling the connector and bulb holder apart.


Inside the bulb holder are 3 locating lugs. When fitting the new bulb unit, the lugs must mate up to the connector correctly.

Refitting is a reverse of the removal process. Make sure the connector lock is pressed down and that the bulb unit locates securely into the fog light housing.