2017 Range Rover Evoque

FUSE BOX LOCATIONS

CAUTION

When a fuse box lid is removed, take care to protect the box from moisture. Refit the lid at the earliest opportunity.

Access can be gained to the fuses as follows:

  1. Engine compartment fuse box: Remove the 2 plastic fixings securing the air box tube. Pull the air box tube up to release it from the air box. Unlatch the tabs securing the fuse box cover. The fuse numbers and positions are displayed on the fuse box.

  2. Passenger compartment fuse box (upper): Open the glovebox. Remove the panel from the glovebox liner. A label on the panel shows the circuits protected and the fuse locations.

  3. Passenger compartment fuse box (lower): Remove the lower access panel.

  4. Loadspace (upper and lower) fuse boxes (5 door and Coupe vehicles only): Remove the panel from the left-side of the loadspace. A label on the panel shows the circuits protected and the fuse locations.

  5. Loadspace (upper and lower) fuse boxes (Convertible vehicles only): Remove the panel from the left-side of the loadspace. A label on the panel shows the circuits protected and the fuse locations.

  6. Loadspace (underfloor) fuse box (5 door and Coupe vehicles only): Lift the loadspace floor. Remove the spare wheel and tire repair kit housing. The fuse numbers and positions are displayed on the fuse box.