2017 Range Rover Evoque



The vehicle’s warranty may be invalidated if damage is caused by the use of unapproved engine oil.


Low quality or obsolete oils do not provide the protection required by modern, high performance engines.


Failure to use an oil that meets the required specification could cause excessive engine wear, a build up of sludge and deposits, and increase pollution. It could also lead to engine failure. See LUBRICANTS AND FLUIDS.


Do not use oil additives of any type, as engine damage could occur. Use only specified lubricants.


Overfilling with oil could result in severe engine damage. Oil should be added in small quantities and the level needs to be rechecked to make sure the engine is not overfilled.

To top up the engine oil:

  1. Remove the oil filler cap.

  2. Add oil to maintain the level between the MIN and MAX marks or notches on the dipstick.


    It is essential to use the correct specification oil. Make sure the oil is suitable for the climatic conditions in which the vehicle is to be operated.


    The 2.0L gasoline engine requires approximately 0.8 quarts (0.8 L) of engine oil to raise the level from MIN to MAX.

  3. Clean up any oil spilled during topping up.

  4. Check the oil level again after 5 minutes.

  5. Refit the oil filler cap.