2020 Defender

CONNECTING A STARTING AID

To start the vehicle using a starting aid, or a slave battery, carry out the following:

  1. Connect the positive (red) jump lead to the vehicle's positive (+) boost point terminal.

  2. Connect the negative (black) jump lead to the vehicle's negative (-) boost point terminal.

  3. Switch on the starting aid.

  4. Start the engine. Allow the engine to idle.

  5. Disconnect the negative (black) jump lead from the vehicle's boost point terminal.

  6. Switch off the starting aid.

  7. Disconnect the positive (red) jump lead from the vehicle's boost point terminal.