2020 Defender

CLEARSIGHT REAR-VIEW MIRROR

WARNING

The ClearSight rear-view mirror has a limited view. The driver is responsible for detecting obstacles and estimating the vehicle's distance from them when manoeuvring the vehicle. Driver distraction can lead to accidents, potentially causing serious injury or death.

CAUTION

When cleaning the ClearSight rear-view mirror glass, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing and damage the mirror.

A ClearSight rear-view mirror uses a camera and a mirror-integrated display. The ClearSight rear-view mirror camera mode displays a wide-angle camera view of the area behind the vehicle. Alternatively, use the ClearSight rear-view mirror as a conventional mirror.

  1. HomeLink® buttons. See RADIO FREQUENCY (RF) TRANSCEIVER.

  2. ClearSight rear-view mirror mode switch.

  3. ClearSight rear-view mirror settings button.

  4. ClearSight rear-view mirror settings adjuster button - Down.

  5. ClearSight rear-view mirror settings adjuster button - Up.

To enable the ClearSight rear-view mirror camera mode, pull the ClearSight rear-view mirror mode switch (2) rearward.

Push the mode switch (2) forward to disable.

The user can adjust the following ClearSight rear-view mirror settings:

  • Brightness: Press the settings button (3). Adjust the brightness levels using the up (5) and down (4) buttons.

  • Height: Press the settings button twice. Adjust the height using the up (5) and down (4) buttons.

If a ClearSight rear-view mirror system fault is detected, the rear-view mirror displays a camera disabled icon.¹ If the camera display is not available, place the ClearSight rear-view mirror in to mirror mode, and contact a retailer/authorised repairer.

HomeLink® is a registered trademark of Gentex Corporation.

Camera disabled icon.¹