REAR SEAT ACCESS
Make sure that you have read and fully understood the relevant warnings before using any of the features in this section. See FRONT SEAT SAFETY.
Take care not to damage the seatbacks while gaining access to the rear seats.
The front seats tilt and power-slide forward to enable entry and exit of the rear seats.
To pivot the seatback forward, lift the locking lever (1).
Depending on vehicle specification, to move the seat forward or backward, use the switch (2) or slide manually.
To return the seatback, manually pivot the seatback until it locks into its previous position.
The previous position can be a memory position or an adjusted position. If the seat is required to move further rearward and there is still adjustment available, push and hold the switch (2 again).