2019 Discovery Sport

ADAPTIVE SPEED LIMITER

WARNING

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See SPEED LIMITER SAFETY.

  1. LIM.

  2. SET+.

  3. -.

  4. RES.

  5. CAN.

Press the LIM button on the steering wheel to switch the adaptive speed limiter on. Depending on vehicle status, the instrument panel displays either the speed limiter or the adaptive speed limiter information lamp.

If speed limiter is displayed, press and hold the CAN button. The speed limiter information lamp is replaced with the adaptive speed limiter information lamp to confirm that the adaptive speed limiter has been selected.

The adaptive speed limiter does not operate until activated. Press the SET+ button or the RES button to activate the adaptive speed limiter. The Head-Up Display (HUD) and instrument panel display the detected speed limits as icons.

If the adaptive speed limiter detects a speed limit lower than the current vehicle speed, it automatically slows the vehicle to meet the speed limit. Press the RES button to increase the rate of deceleration.

If the adaptive speed limiter detects a speed limit higher than the current vehicle speed, it allows the driver to accelerate up to the speed limit. Press the RES button to increase the rate of acceleration.

Press the CAN button to suspend adaptive speed limiter operation. Press the RES button or the SET+ button to resume adaptive speed limiter operation.

The adaptive speed limiter’s detected speed limit can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the adaptive speed limiter's detected speed limit. When the vehicle's speed drops below the adaptive speed limiter's detected speed limit, any speed limitations are reapplied.

The adaptive speed limiter's detected speed limit can be adjusted, if required, to control vehicle speed at just above or below the detected speed limit. To adjust the detected speed limit:

  1. Press the SET+ button to raise the maximum vehicle speed 2 km/h (1 mph) above the detected speed limit. The maximum increase available is 10 km/h (6 mph) above the detected speed limit. Press and hold the SET+ button to raise the maximum vehicle speed directly to 10 km/h (6 mph) above the detected speed limit.

  2. Press the - button to lower the maximum vehicle speed 2 km/h (1 mph) below the detected speed limit. The maximum decrease available is 10 km/h (6 mph) below the detected speed limit. Press and hold the - button to lower the maximum vehicle speed directly to 10 km/h (6 mph) below the detected speed limit.

NOTES

Any adjustments to the adaptive speed limiter's detected speed limit are lost if the speed limiter is activated, or the vehicle’s electrical systems are switched off.