2016 Discovery Sport

REAR TOWING EYE

WARNING

The towing eye at the rear of the vehicle is designed for on-road recovery only. If they are used for any other purpose, it may result in vehicle damage and serious injury.

WARNING

Use extreme caution when moving or towing the vehicle. Death or serious injury may occur.

The towing eye must be screwed into the towing point, located behind the panel on the right-side of the rear bumper. The towing eye is located under the loadspace floor cover.

  1. Pop out the access cover by pressing the lower edge to release the securing clip. The cover is retained on the bumper by its tether, but can be released for safe stowage.

  2. Locate the towing eye through the bumper, and fully screw the towing eye clockwise into the towing point until secure.

Fitment of the panels is the reverse of removal.

WARNING

Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.

Vehicles with a Dynamic bumper cover:
  1. Pop out the access cover. The cover is retained on the bumper by its tether, but can be released for safe stowage.

  2. Locate the towing eye through the bumper, and fully screw the towing eye clockwise into the towing point until secure.

Fitment of the panels is the reverse of removal.

WARNING

Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.