REVERSING LIGHT AND REAR TURN SIGNAL BULB REPLACEMENT

Replacing a rear turn signal:

1. Remove the appropriate loadspace vent door.

2. Rotate the rear light's securing screw counter-clockwise, until fully released. Remove the securing screw. Withdraw the rear light unit.

3. At the rear of the rear light unit, rotate the bulb holder counter-clockwise and pull to access the turn signal bulb.

Reverse the removal procedure to install a bulb holder/bulb unit.

Replacing a reversing light bulb:

1. Remove the appropriate tailgate access door.

2. Rotate the bulb holder downwards. Pull to remove the holder from the light unit and to access the reversing bulb.

Reverse the removal procedure to install a bulb holder/bulb unit.