2016 Discovery Sport

PANORAMIC ROOF BLIND RESET

NOTES

The following procedure also resets the panoramic roof.

The roof blind needs to be reset if the battery is disconnected, becomes discharged, or the power supply is interrupted. The reset procedure is as follows:

  1. Start the engine.

  2. With the roof and blind closed, press the roof close switch firmly and hold for approximately 10 seconds. The roof/blind will make an audible click.

  3. Release the switch.

  4. Within 5 seconds, press and hold the roof close switch again. The roof blind and roof blind opening panel will both fully open, then both close. Release the switch once movement is complete.

The panoramic roof/blind can now be operated as normal.