2015 Discovery Sport

LIGHTING CONTROL

  1. With the headlamps on, push the control away from the steering wheel to select high beam. The Instrument panel warning lamp will illuminate. See HIGH BEAM (BLUE).

    NOTES

    Do not use high beam where it may distract other road users.

  2. Pull the control towards the steering wheel and release to flash the high beam on and off. The high beam will remain on for as long as the switch is held.

  3. Side lamps: Rotate the control to this position to switch the side lamps on. The Instrument panel warning lamp will illuminate. See SIDE LIGHTS (GREEN) .

  4. Headlamps: Rotate the control to this position to switch the headlamps on.

  5. AUTO: With Auto lamps selected, when the ambient light fades and the ignition is on, the side lamps, tail lamps, low beam headlamps and license plate lamps will switch on automatically. Headlamp courtesy delay, Auto high beam and the Windshield wipers detection may also be activated.

    NOTES

    Low exterior light levels, caused by adverse weather conditions, may also cause the Auto lamps to activate.

  6. Front fog lamps: Will operate only while side lamps, headlamps or Auto lamps are selected. Turn the collar away from the steering wheel and release. The Instrument panel warning lamp will illuminate. See FRONT FOG LIGHTS (GREEN).

    To turn off the Front fog lamps: Turn the collar away from the steering wheel again and release.

  7. Rear fog lamps: Will operate only while the side lamps, headlamps or Auto lamps are selected. Turn the collar towards the steering wheel and release. The Instrument panel warning lamp will illuminate. See REAR FOG LIGHTS (AMBER).

    To turn off the Rear fog lamps: Turn the collar towards the steering wheel again and release.

In the event of a bulb failure, it should be noted that some bulbs are replaceable only by a Retailer/Authorized Repairer. See CHANGING A BULB.

Instructional video - Auto lamps.: